Engineering, 24.09.2020 09:01 tay9122

Electrically heated draw batch furnaces are commonly used in the heat treatment industry. Consider a draw batch furnace front made of a 20-mm thick steel plate with a thermal conductivity of 25 W/m·K. The furnace is situated in a room with surrounding air temperature of 20°C and an average convection heat transfer coefficient of 10 W/m2·K. If the inside surface of the furnace front is subjected to uniform heat flux of 5 kW/m2 and the outer surface has an emissivity of 0.30, determine the inside surface temperature of the furnace front in K. (Round your answer up to 2 decimal places.)

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

You know the right answer?

Electrically heated draw batch furnaces are commonly used in the heat treatment industry. Consider a...