subject
Engineering, 22.09.2020 18:01 brendaesme

The substance called olivine may have any composition between Mg2SiO4 and Fe2SiO4, i. e. the Mg atoms can be replaced by Fe atoms in any proportion without altering the crystal structure except by expanding it slightly: this is an example of a binary solid solution series. For different compositions, the lines in the powder diffraction patterns are in slightly different positions, because of the cell expansion, but the overall pattern remains basically the same. The spacing of the lattice planes varies linearly with composition, and this can be used in a rapid and non- destructive method of analysis. a. The (062) reflection from olivine is strong and well resolved from other lines. Calculate d062 for an olivine that displays its (062) reflection at a Bragg angle of 37.21° (i. e., a diffraction angle of 74.42°) when x-rays with a wavelength of 0.1790 nm are used. b. The d062 spacing as measured accurately for synthetic materials is 0.14774 nm for Mg2SiO4 and 0.15153 nm for Fe2SiO4. What would be the approximate composition, expressed in mol.% Mg2SiO4, of an olivine material for which do62 has the value obtained in part 2.1 above?

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
image
Engineering, 04.07.2019 18:20, moneywaydaedae
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
image
Engineering, 04.07.2019 19:10, nayi2002
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
image
Engineering, 04.07.2019 19:10, nida7864
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
The substance called olivine may have any composition between Mg2SiO4 and Fe2SiO4, i. e. the Mg atom...

Questions in other subjects:

Konu
Mathematics, 01.11.2020 19:50
Konu
Social Studies, 01.11.2020 19:50