Engineering, 21.09.2020 02:01 sihamabdalla591

A 150 mm long tie rod in a car engine is loaded in uniaxial tension. The tie rod must not extend more than 1 mm under the maximum applied stress of 30 MPa. Specify a constraint for elastic modulus which can be used to screen out materials that cannot be used in this application. Assume that the tie rod material remains elastic at this level of stress.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

Engineering, 04.07.2019 19:20, praveen35301

Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer

Answers: 1

continue

Engineering, 06.07.2019 03:10, zah16

List and describe the parts of boxford cnc milling machine with pictures?

Answers: 2

continue

You know the right answer?

A 150 mm long tie rod in a car engine is loaded in uniaxial tension. The tie rod must not extend mor...