Engineering, 10.09.2020 04:01 Thejollyhellhound20

Q.4. Two thermocouples (temperature measurement devices) are tested by inserting their probes in boil- ing water, recording the readings, removing and drying the probes, and then doing it again. The results of five measurements are as follows: T(°C)-Thermocouple A | 72.4 | 73.1 | 72.6 72.8 | 73.0 T(C) Thermocouple B 973 1014 98.701100.4 (a) For each set of temperature readings, calculate the sample mean, the range, and the sample (b) Which thermocoupie readings exhibit the higher degree of scatter? Which thermocouple is more standard deviation. accurate?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, samanthabutryn

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

continue

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Engineering, 04.07.2019 18:10, krystabrewer3

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

You know the right answer?

Q.4. Two thermocouples (temperature measurement devices) are tested by inserting their probes in boi...