Engineering, 09.09.2020 23:01 KarlaOsorio7779
Describe the heat treatment we would need to perform to create the spheroidite microstructure for our 1018 steel samples (assume we start with the material well austenized at 950°C).
Answers: 2
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:20, cdyshaylia55
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
Engineering, 04.07.2019 19:20, amandaaarmentaa
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
Engineering, 06.07.2019 03:10, iiisavageoreo
Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?
Answers: 2
Describe the heat treatment we would need to perform to create the spheroidite microstructure for ou...
Mathematics, 25.02.2022 14:10
History, 25.02.2022 14:10
Mathematics, 25.02.2022 14:10
Mathematics, 25.02.2022 14:10