Engineering, 08.09.2020 14:01 yahnna8

Find the time-domain sinusoid for the following phasors: (a) 5+j4
(b) 5 -j4
(c)-5+j4
(d)-5-j4

Answers: 3

Show answers

Answers

Answer from: miyah1199

Answer:

a. r(t) = 6.40 cos (ωt + 38.66°) units

b. r(t) = 6.40 cos (ωt - 38.66°) units

c. r(t) = 6.40 cos (ωt - 38.66°) units

d. r(t) = 6.40 cos (ωt + 38.66°) units

Explanation:

To find the time-domain sinusoid for a phasor, given as a + bj, we follow the following steps:

(i) Convert the phasor to polar form. The polar form is written as;

r∠Ф

Where;

r = magnitude of the phasor = $\sqrt{a^2 + b^2}$

Ф = direction = tan⁻¹ ( $\frac{b}{a}$ )

(ii) Use the magnitude (r) and direction (Φ) from the polar form to get the general form of the time-domain sinusoid (r(t)) as follows:

r(t) = r cos (ωt + Φ)

Where;

ω = angular frequency of the sinusoid

Φ = phase angle of the sinusoid

(a) 5 + j4

(i) convert to polar form

r = $\sqrt{5^2 + 4^2}$

r = $\sqrt{25 + 16}$

r = $\sqrt{41}$

r = 6.40

Φ = tan⁻¹ ( $\frac{4}{5}$ )

Φ = tan⁻¹ (0.8)

Φ = 38.66°

5 + j4 = 6.40∠38.66°

(ii) Use the magnitude (r) and direction (Φ) from the polar form to get the general form of the time-domain sinusoid

r(t) = 6.40 cos (ωt + 38.66°)

(b) 5 - j4

(i) convert to polar form

r = $\sqrt{5^2 + (-4)^2}$

r = $\sqrt{25 + 16}$

r = $\sqrt{41}$

r = 6.40

Φ = tan⁻¹ ( $\frac{-4}{5}$ )

Φ = tan⁻¹ (-0.8)

Φ = -38.66°

5 - j4 = 6.40∠-38.66°

(ii) Use the magnitude (r) and direction (Φ) from the polar form to get the general form of the time-domain sinusoid

r(t) = 6.40 cos (ωt - 38.66°)

(i) convert to polar form

r = $\sqrt{(-5)^2 + 4^2}$

r = $\sqrt{25 + 16}$

r = $\sqrt{41}$

r = 6.40

Φ = tan⁻¹ ( $\frac{4}{-5}$ )

Φ = tan⁻¹ (-0.8)

Φ = -38.66°

-5 + j4 = 6.40∠-38.66°

(ii) Use the magnitude (r) and direction (Φ) from the polar form to get the general form of the time-domain sinusoid

r(t) = 6.40 cos (ωt - 38.66°)

(d) -5 - j4

(i) convert to polar form

r = $\sqrt{(-5)^2 + (-4)^2}$

r = $\sqrt{25 + 16}$

r = $\sqrt{41}$

r = 6.40

Φ = tan⁻¹ ( $\frac{-4}{-5}$ )

Φ = tan⁻¹ (0.8)

Φ = 38.66°

-5 - j4 = 6.40∠38.66°

(ii) Use the magnitude (r) and direction (Φ) from the polar form to get the general form of the time-domain sinusoid

r(t) = 6.40 cos (ωt + 38.66°)

Answer from: Quest

answer: i want to be brainest and get free points

explanation:

Answer from: Quest

answer: 5

explanation:

6-1

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Engineering, 04.07.2019 19:10, rayne40

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

continue

Engineering, 04.07.2019 19:10, 592400014353

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

continue

Engineering, 04.07.2019 19:20, littlepotato10

To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.

Answers: 1

continue

You know the right answer?

Find the time-domain sinusoid for the following phasors: (a) 5+j4
(b) 5 -j4
(c)-5+j4...