subject
Engineering, 05.09.2020 05:01 NathanChavez4313

Tensile test was conducted on a structural steel specimen with a stem diameter 0.26 in. At failure the measured diameter was 0.145 in. The gage length of the sample at the beginning of the test was 1.800 in. and at failure was 2.280 in. The load/deformation data is recorded in the given Excel file. Use Excel to create a stress-strain plot of the data. Include a chart title and axis titles with appropriate units. Calculate the stress-strain data in tabular formPlot the stress-strain diagramDetermine the yield strength, ultimate tensile strength, and rupture(breaking) strengthCalculate the modulus of elasticity, % elongation, and % reduction in areaCompare the values for yield strength and modulus of elasticity with theoretical valuesCalculate the true stress and true strain at failureIdentify the material as brittle or ductileGiven Excel Values:.Load Deformation lb (ΔL) in. 0 0.0000 100 0.0006 200 0.0007 300 0.0008 400 0.0009 500 0.0011 600 0.0012 700 0.0014 800 0.0015 900 0.00171000 0.00181100 0.00191200 0.00201300 0.00221400 0.00231500 0.00241600 0.00261700 0.00271800 0.00501900 0.01002000 0.02002100 0.03002200 0.04002300 0.05002350 0.06002450 0.07002550 0.08002650 0.09002750 0.10002850 0.11002950 0.12003050 0.13003150 0.14003250 0.15003350 0.17003450 0.20003100 0.29002700 0.39002280 0.4800

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
image
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
You know the right answer?
Tensile test was conducted on a structural steel specimen with a stem diameter 0.26 in. At failure t...

Questions in other subjects:

Konu
Mathematics, 18.09.2020 21:01
Konu
English, 18.09.2020 21:01
Konu
Social Studies, 18.09.2020 21:01
Konu
Mathematics, 18.09.2020 21:01
Konu
Mathematics, 18.09.2020 21:01
Konu
History, 18.09.2020 21:01
Konu
English, 18.09.2020 21:01
Konu
Social Studies, 18.09.2020 21:01
Konu
Mathematics, 18.09.2020 21:01
Konu
History, 18.09.2020 21:01