Engineering, 26.08.2020 17:01 ineedhelp2285

63 + 216 Ω ∅ ⁄ empedansına sahip dengeli ∆ bağlı bir yük 50∠0° Ω ∅ ⁄ empedansına sahip dengeli bağlı bir yüke parallel bağlıdır. Paralel yükler 1 + 3 Ω ∅ ⁄ empedansına sahip bir hattan beslenmektedir. Bağlı yükün hattan nötr'e geliminin büyüklüğü 750 'tur. a) Yükleri besleyen hattaki akımın büyüklüğünü hesaplayınız? b) Hattın gönderici ucundaki faz geriliminin büyüklüğünü hesaplayınız? c) Kaynaklar tarafından sağlanan toplam görünür, ortalama ve reaktif güçleri bulunuz?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, 0436500

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

Engineering, 04.07.2019 19:10, nbunny7208

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

continue

You know the right answer?

63 + 216 Ω ∅ ⁄ empedansına sahip dengeli ∆ bağlı bir yük 50∠0° Ω ∅ ⁄ empedansına sahip dengeli bağlı...