subject
Engineering, 25.08.2020 21:01 EBeast7390

63 + 216 Ω ∅ ⁄ empedansına sahip dengeli ∆ bağlı bir yük 50∠0° Ω ∅ ⁄ empedansına sahip dengeli bağlı bir yüke parallel bağlıdır. Paralel yükler 1 + 3 Ω ∅ ⁄ empedansına sahip bir hattan beslenmektedir. bağlı yükün hattan nötr’e geliminin büyüklüğü 750 ’tur. a) Yükleri besleyen hattaki akımın büyüklüğünü hesaplayınız?
b) Hattın gönderici ucundaki faz geriliminin büyüklüğünü hesaplayınız?
c) Kaynaklar tarafından sağlanan toplam görünür, ortalama ve reaktif güçleri bulunuz?

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:10, genyjoannerubiera
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
image
Engineering, 04.07.2019 18:10, tobyhollingsworth178
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
You know the right answer?
63 + 216 Ω ∅ ⁄ empedansına sahip dengeli ∆ bağlı bir yük 50∠0° Ω ∅ ⁄ empedansına sahip dengeli bağlı...

Questions in other subjects:

Konu
Computers and Technology, 02.01.2022 20:10
Konu
Computers and Technology, 02.01.2022 20:20