subject
Engineering, 25.08.2020 09:01 lily8450

An open channel has a trapezoidal cross section with a bottom width of 5 m and side slopes of 2 : 1 (H : V). If the depth of flow is 2 m and the average velocity in the channel is 1 m/s, calculate the discharge in the channel.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 19:10, Destinationz
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
image
Engineering, 06.07.2019 03:30, aminsaad4253
Abrayton cycle operates with a regenerator on the air-standard with properties evaluated at 400 k. the tem- perature of the air entering the compressor is 350k while the temperature of the air exiting the compressor is 600 k. the temperature of the air entering the turbine is 1600 k. the overall cycle produced 600 kj/kg of net work out. assuming a regenerator effectiveness of 0.8, what is the temperature of the air before heat addition (combustion)? draw this process on a t - s diagram
Answers: 3
image
Engineering, 06.07.2019 05:10, leshia39
Agas contained in a piston-oylinder assembly is initially at p1=100 ibf/ft^2? and occupies a volume of 3.75 ft. the gas is compressed to a pressure p2=500 ibf/ft^2 and a final volume of 0.5 ft. during the process, the relationship between pressure and volume is given as p= a +bv, where a and b are constants a)-determine the values and units for a and b b)-determine the volume, in ft, at an intermediate state where the pressure is 300 ibt/t2.
Answers: 2
image
Engineering, 06.07.2019 05:10, joejoefofana
Determine the heat loss per hour from a wall of a build- ing when the wind is blowing parallel to its surface with a speed of 2 km/hour. the wall is 5 metre long and 3 metre high. tempe rature of the wall is 25°c and air temperature is 5°c.
Answers: 2
You know the right answer?
An open channel has a trapezoidal cross section with a bottom width of 5 m and side slopes of 2 : 1...

Questions in other subjects: