Engineering, 15.08.2020 19:01 coolkitty35

A3-kN axial load and a 7-kN radial load are loaded on a02-series single-row deep-groove ball bearing with a 65-mm bore. The outer ring rotates at 500 rpm. Determine the equivalent radial load that will be experienced by this particular bearing. Load Ratings, kNBore (mm)OD (mm)Width (mm)Deep GrooveC C0Angular ContactC C0651202355.934.063.741.5Table 1. Dimensions and load ratings for single-row 02-series deep-groove and angular-contact ball bearingsFa/(VFr) ≤eFa/(VFr) ≥eFa/C0eX1Y1X2Y20.0840.281.0000.561 .550.1100.301.0000.561.45Table 2. Equivalent radial load factors for ball bearing

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:20, CelesteN64

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

continue

You know the right answer?

A3-kN axial load and a 7-kN radial load are loaded on a02-series single-row deep-groove ball bearing...