Engineering, 15.08.2020 14:01 mcckenziee

Part II. Circle the correct answer and write the possible explanation of your reason (2 points each). 1. Which of the following descriptions about anatomical planes and relationships are not correct? A. Anterior refers to the front of the body B. Inferior refers to the lower part of the body C. Mid-sagital plane divides the body into left and right halves D. Coronal plane divides the body into the front upper and lower halves Why? 2. Which descriptions are not correct about the fatigue of muscles? A. During sustained isometric contractions, muscle may be starved of oxygen B. Lactic acid accumulates as oxygen-dependent metabolic process take place C. Depletion of muscle glycogen is one of the causes of fatigue in endurance athletes D. None Why? 3. Which descriptions are not correct about human bones and joints? A. Skull joints belong to diathermic joints B. Shoulder joints belong to the ball-and-socket joint C. Elbow joints belong to the hinge type of joint D. Humerus belongs to the appendicular skeleton Why? 4. When a person is subjected to mental stresses, which of the following are not true? A. Heart rate increases B. Oxygen consumption increases C. Skin temperature decreases D. Blood presses decreases Why?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:20, maciemarklin79981

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

Engineering, 04.07.2019 19:10, ndaha

An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?

Answers: 2

continue

You know the right answer?

Part II. Circle the correct answer and write the possible explanation of your reason (2 points each)...