Question 19
1 pts
Which of the following best explains why the electrical connections and sta...
Engineering, 13.08.2020 04:01 MysteryDove12
Question 19
1 pts
Which of the following best explains why the electrical connections and starting relays on
hermetic compressors are typically installed outside the compressor housing?
Electrical arcing could break down and contaminate the refrigerant, leading to a compressor burnout.
Most refrigerants are highly flammable and electrical arcing could result in a compressor explosion.
Refrigerant is highly corrosive and would damage the electrical components in a matter of days.
All of the above.
Answers: 3
Engineering, 04.07.2019 19:10, jimena15
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Engineering, 04.07.2019 19:10, ndaha
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
Engineering, 05.07.2019 23:20, neisha2507
Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket
Answers: 3
History, 28.08.2020 08:01
Mathematics, 28.08.2020 08:01
Mathematics, 28.08.2020 08:01
Mathematics, 28.08.2020 08:01
Mathematics, 28.08.2020 08:01
Mathematics, 28.08.2020 08:01