subject
Engineering, 12.08.2020 05:01 josephvcarter

A dehumidifier receives air with a 60% relative humidity at 300 K, 1 bar, and the dehumidifier releases air at 287.6 K, 1 bar, and 90% relative humidity. The volumetric flow rate of air in the dehumidifier is 4.72 m3/min. The dried air then mixes with a wet air stream at 308.5 K, 1 bar, and 47% relative humidity with a 55 m3/min volumetric flow rate in an insulated chamber. Ignoring heat losses and changes in kinetic and potential energy, determine: The rate of water condensation in the dehumidifier, in kg/h The temperature and relative humidity of the exit air stream from the chamber.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, mm016281
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
image
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
image
Engineering, 04.07.2019 18:20, DroctorWellsfan
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
You know the right answer?
A dehumidifier receives air with a 60% relative humidity at 300 K, 1 bar, and the dehumidifier relea...

Questions in other subjects: