subject
Engineering, 12.08.2020 05:01 emilyrobles

A motor connected to a single stage gear box operates at 1800 rpm and 5 hp. Given a diametral pitch P of 12, pitch angle of 20 degrees and a gear ratio of 6, determine the following, noting that the output gear is larger diameter and will operate at lower speed and higher torque: Number of teeth on pinion gear. (Use least possible number of teeth without causing interference with full profile teeth) Determine the pitch diameter (inches) of pinion gear: Number of teeth on output gear: Determine the pitch diameter (inches) of output gear: Output gear speed (rpm): Input shaft torque (in-lb): Output shaft torque (in-lb): Tangential force between gear teeth on pitch diameters: (Hint: You can use either gear to determine this, as you will get same answer.) Determine the resultant load along the pitch line: Determine the ideal shaft spacing:

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, bryneosburn
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
image
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
image
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
image
Engineering, 04.07.2019 18:10, Fahaddie
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
You know the right answer?
A motor connected to a single stage gear box operates at 1800 rpm and 5 hp. Given a diametral pitch...

Questions in other subjects: