Engineering, 12.08.2020 06:01 micahwilkerson8344

A Brayton cycle gas engine is analyzed using the air standard method. Given the conditions at state 1, pressure ratio (rp), and cutoff ratio (rc) determine the efficiency and other values listed below. The specific heat ratio and gas constant for air are given as k= 1.4 and R= 0.287 kJ/kg-K respectively. —Given Values--
T1 (K) =310
P1 (kPa)= 161
rp = 9.2
Rc=2.21
AV (m3/s) = 5

a. Determine the specific enthalpy (kJ/kg) at state 1.
b. Determine the relative pressure at state 1.
c. Determine the relative pressure at state 2.
d. Determine the temperature (K) at state 2.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

You know the right answer?

A Brayton cycle gas engine is analyzed using the air standard method. Given the conditions at state...