subject
Engineering, 05.08.2020 04:01 ella3714

Determine whether each of the following systems are 1. Linear or non-linear 2. Time-invariant or time varying 3. Causal or non-causal 4. BIBO stable or unstable 5. Memory-less or not. Justify each of your answers. (Stating an answer without justification will earn you no credit)a. y[n]= 3x[2n] b. y[n] = n^2x[n+1] c. y[n] = Cos(ωo. n) x[n-5] where ωo is a constant d. y[n] = e^n x[5-n] e. where N is a constant

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, Talos02
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
image
Engineering, 04.07.2019 19:10, batmanmarie2004
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
image
Engineering, 04.07.2019 19:20, qurreab26
A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.
Answers: 1
image
Engineering, 06.07.2019 03:20, demotte79991
What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.
Answers: 3
You know the right answer?
Determine whether each of the following systems are 1. Linear or non-linear 2. Time-invariant or tim...

Questions in other subjects:

Konu
Mathematics, 26.06.2020 16:01