Engineering, 03.08.2020 14:01 nickp1233
A cast steel pinion (0o = 120MNm-2,
2) rotating at 315 rpm drives a cast steel gear of a different grade (0o = 135 MNm-2
2) at a velocity ratio
of 3.0 to 1. The pinion has 24 teeth, a module of 6 mm and the pressure angle is 200.
Given all the previous calculations, is the dynamic load less
than the allowable endurance load?
True
Or
False
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10, jojoangelique13
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
A cast steel pinion (0o = 120MNm-2,
2) rotating at 315 rpm drives a cast steel gear of a different...
Questions in other subjects:
