Engineering, 01.08.2020 20:01 bdog70
Consider the following amplitudemodulation(AM)transmission system. The input signal is푥푡=%&'+*+.We first multiply 푥(푡)by 푐표푠(4푡). That is, 푦푡=푥푡⋅푐표푠(4푡).The transmitter then transmits signal 푦(푡)through the antenna. At the receiver side, we first multiply 푦(푡)by 2푠푖푛(4푡). That is 푧(푡)=푦(푡)·2푠푖푛(4푡)and then pass 푧(푡)through a low pass filter with cutoff frequency 푊=7.5푟푎푑/푠푒푐. Denote the final output by 푤(푡)=푧(푡)*h퐿푃퐹(푡). 1.Plot the CTFT 푊(푗휔)of 푤(푡)for the range of -10<휔<10. 2.Find the expression of 푤(푡)
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
You know the right answer?
Consider the following amplitudemodulation(AM)transmission system. The input signal is푥푡=%&'+*+....
Questions in other subjects:
English, 10.08.2021 17:30
English, 10.08.2021 17:30
English, 10.08.2021 17:30
Health, 10.08.2021 17:30
