subject
Engineering, 24.07.2020 14:01 jaallen3679

Determine the horizontal length of CD that must be laid out to achieve required true horizontal distance CD.
assume a 100-ft steel tape will be used, with crosssectional area 0.0060 in2, weight 2.0 lb, and standardized
at 68 0F to be 100.014 ft between end marks when
supported through out with a 12-lb pull.
REQUIRED AVERAGE MEANS OF TENSION
HORIZONTAL TEMPRATURE SUPPORT (lb)
DISTANCE CD (ft) (0F)
200.00 68 Throughout 12
378.68 37 Ends only 16
97.00 46 Ends only 18


Determine the horizontal length of CD that must be laid

out to achieve required true horizontal d

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, lerasteidl
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
image
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
image
Engineering, 04.07.2019 18:20, RiverH246
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
image
Engineering, 04.07.2019 18:20, Doogsterr
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
You know the right answer?
Determine the horizontal length of CD that must be laid out to achieve required true horizontal dis...

Questions in other subjects: