Engineering, 23.07.2020 17:01 Kayla5779
Water is the working fluid in an ideal Rankine cycle. Superheatedvapor enters the turbine at 10MPa, 480°C, and the condenser pressure is6 kPa. Isentropic efficiencies of the turbine and pump are 80% and 75%,respectively. Determine for the cyclea. the actual heat transfer to the working fluid passing through thesteam generator, in kJ per kg of steam flowing. b.the thermal efficiency. c.the actual heat transfer from the working fluid passing through thecondenser to the cooling water, in kJ per kg of steam flowing
Answers: 1
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10, genyjoannerubiera
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Water is the working fluid in an ideal Rankine cycle. Superheatedvapor enters the turbine at 10MPa,...