Engineering, 23.07.2020 01:01 liyahheadhigh

A Si step junction maintained at room temperature under equilibrium conditions has a p-side doping of Na = 2x1015/cm3 , and an n-side doping of Nd = 1015/cm3 . Compute
(a) Built-in potential Vbi
(b) Depletion region width W, and xp, xn
(c) Maximum electric field at x=0
(d) Electrostatic potential V at x=0
(e) Make sketches of the charge density, electric field, and electrostatic potential as a function of position x

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, genyjoannerubiera

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Engineering, 04.07.2019 18:20, kendrawalraven

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

continue

Engineering, 04.07.2019 19:10, Mimidj9279

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

continue

You know the right answer?

A Si step junction maintained at room temperature under equilibrium conditions has a p-side doping o...