Engineering, 14.07.2020 23:01 bribaby74

1 body - 4 pipes and 104 pipes per passage (each with a diameter of 2.6 cm, 4 m per passage A thin wall heat exchanger) will be used to heat the air. Water pipes to 8 kg / h at 350 K temperature With mass flow, air enters the body at 15 C with a mass flow of 18 kg / s. Over time, inside the pipe The pollution factor of the formed sediment is 0.0026 m2K / W. The transport coefficients on the inner and outer surfaces of the pipes are 450 and 200 W / m2K is estimated. Using specific temperatures at 25 C for air and water a-) The effectiveness of the heat exchanger by drawing the shape of the problem, b-) Heat transfer rate (kW), c-) Calculate the outlet temperatures (C) of the water and air and show the temperatures in the T_L diagram.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:20, alexis9263

Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms

Answers: 2

continue

Engineering, 04.07.2019 18:20, AnonymousLizard52303

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

continue

Engineering, 04.07.2019 19:10, gabrielaperezcz

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

continue

You know the right answer?

1 body - 4 pipes and 104 pipes per passage (each with a diameter of 2.6 cm, 4 m per passage A thin w...