Engineering, 13.07.2020 20:01 hijoputa

A liquid-liquid extraction process consists of two units, a mixer and a separator. One inlet stream to the mixer consists of two components, species-A and species-B. A stream of pure species-C is fed into the mixer to drive the extraction. The mixture is then fed to a separator where it is allowed to settle into two phases which are removed in separate streams. Each outlet stream contains all three species. The goal of the process is to produce an outlet stream with a high concentration of species-A. Given the data below, perform a degree- of-freedom analysis and determine the order in which systems of equations must be solved to characterize every stream in the process. Then solve the system for all unknown flow rates and compositions. • One inlet stream to the mixer flows at 100.0 kg/hr and is 35wt% species-A and 65wt% species-B.
• One inlet stream to the mixer is pure species-C, and the flow rate is unknown.
• One outlet stream from the separator is 85wt% species-A and 10wt% species-B.
• One outlet stream from the separator is 25wt% species-B and 70wt% species-C.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

Engineering, 04.07.2019 19:10, lexie223

Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.

Answers: 2

continue

You know the right answer?

A liquid-liquid extraction process consists of two units, a mixer and a separator. One inlet stream...