Consider a fully developed laminar flow in a circular pipe. The velocity at R/2 (midway between the wall surface and the centerline) is given by provided that Vmax is the maximum velocity in the tube.

The velocity at R/2 (midway between the wall surface and the centerline) is given by (3/4)(Vmax) provided that Vmax is the maximum velocity in the tube.

Explanation:

Starting from the shell momentum balance equation, it can be proved that the velocity profile for fully developedblaminar low in a circular pipe of internal radius R and a radial axis starting from the centre of the pipe at r=0 to r=R is given as

v = (ΔPR²/4μL) [1 - (r²/R²)]

where v = fluid velocity at any point in the radial direction

ΔP = Pressure drop across the pipe

μ = fluid viscosity

L = pipe length

But the maximum velocity of the fluid occurs at the middle of the pipe when r=0

Hence, maximum veloxity is

v(max) = (ΔPR²/4μL)

So, velocity at any point in the radial direction is

v = v(max) [1 - (r²/R²)]

At the point r = (R/2)

r² = (R²/4)

(r²/R²) = r² ÷ R² = (R²/4) ÷ (R²) = (1/4)

So,

1 - (r²/R²) = 1 - (1/4) = (3/4)

Hence, v at r = (R/2) is given as

v = v(max) × (3/4)

Hope this Helps!!!

hes mad if he says,

explanation:

r!