Engineering, 02.07.2020 05:01 sanago4785

1 Consider a reaction system for which the rate versus conversion data have been evaluated to be XA 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 CA 0 /-rA(min) 10 12.346 15.625 20.408 27.778 40.000 62.500 111.11 If the inlet flow to a reactor system is 25 liters/min determine: a. The volume of a CSTR required for a conversion of 50 %. b. The volume of a PFR required for a conversion of 50 % c. The conversion that could be obtained for CSTR of volume 400 L. d. The conversion that could be obtained for a PFR of volume 200 L. e. The maximum conversion that can be obtained by using a 200 L CSTR and a 200 L PFR

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, salazjlove

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

continue

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

You know the right answer?

1 Consider a reaction system for which the rate versus conversion data have been evaluated to be XA...