Engineering, 01.07.2020 21:01 genyjoannerubiera
A sintered structure is formed from 20 um powders. After sintering to 92% density, the pores are 1 um as the compact enters final-sage sintering. Sintering in argon results in less than full density. Predict the final pore size and density. What alternative might be considered for reaching full density
Answers: 2
Engineering, 04.07.2019 18:10, Larkinlover703
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:20, moneywaydaedae
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 18:20, rocio5649
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa. s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
A sintered structure is formed from 20 um powders. After sintering to 92% density, the pores are 1 u...
Mathematics, 14.08.2020 02:01
English, 14.08.2020 02:01
Mathematics, 14.08.2020 02:01