Engineering, 30.06.2020 18:01 zahriaarana

Data Table 1: Resistors in Series Battery Voltage R1 R2 R3 Rea 1.60 V Calculated Resistance (12) 100 1000 2200 3300 5% 5% 5% 5% Tolerance from Color Code (92) DMM Resistance (12) 100.222 105002 2.1422 1152.3422 DMM Current (mA) 0.12mA 0.12mA 0.12mA 0.36mA DMM Voltage (V) 0.12V 1.20V 0.26V 1.58V Calculated Voltage (V) 12.02 x 10^-3V 1.2V 0.0002568V 1.2123V Calculated Current (mA) 0.00037mA 0.00037mA 0.00037mA 0.00037mA Data Table 2: Resistors in Parallel Battery Voltage 1.60 R1 R3 Rea Calculated Resistance (12) 100 1000 2200 3300 DMM Resistance (12) 00.822 00.812 00.802 2.412 DMM Voltage (V) 1.6V 1.6V 1.6V 4.8V DMM Current (mA) -0.72mA -0.15mA -1.6mA -2.5mA Calculated Voltage (V) 1.53V 1.5V -1.92V 0.485V Calculated Current (mA) 15.2mA 1.5mA -0.873mA 1.6mA Data Table 3: Resistors in Combination Battery Voltage Ri R2 R23 Rea 1.60 100 1000 2200 1790 3300 Calculated Resistance (12) DMM Resistance (12) 100.222 105022 2.1422 2.1422 1152.3412 DMM Voltage (V) 0.54V 1.02V 0.0034V 1.02V 2.6V DMM Current (mA) 1.6mA 1.6mA 0.10mA 0.09mA 3.31mA Calculated Voltage (V) 0.049V 0.49V 1.1V 0.34V 1.6V Calculated Current (mA) 0.49mA 0.49mA 0.49mA 0.25mA 1.5mA How do the magnitudes of the currents through the full circuits compare for Parts I-III of this exercise, in which resistors are combined in series, in parallel, and in combination? Use the data recorded in Data Tables 1-3 to answer this question.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:10, lillygrl100

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

continue

Engineering, 04.07.2019 18:10, salazjlove

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

continue

Engineering, 04.07.2019 18:20, myahlit84

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

continue

You know the right answer?

Data Table 1: Resistors in Series Battery Voltage R1 R2 R3 Rea 1.60 V Calculated Resistance (12) 100...