![subject](/tpl/images/cats/User.png)
Engineering, 30.06.2020 18:01 jakiyahporter0817
Compare alternatives on the basis of their capitalized costs at i = 10% per year.
Alternative E F G
First cost, $ −50,000 −300,000 −900,000
AOC, $ per year −30,000 −10,000 −3,000
Salvage value, $ 5,000 70,000 200,000
Life, years 2 4 [infinity]
![ansver](/tpl/images/cats/User.png)
Answers: 2
![](/tpl/images/ask_question.png)
![](/tpl/images/ask_question_mob.png)
Other questions on the subject: Engineering
![image](/tpl/images/cats/User.png)
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:20, yasyyas646646
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
You know the right answer?
Compare alternatives on the basis of their capitalized costs at i = 10% per year.
Alternative E F G...
Questions in other subjects:
![Konu](/tpl/images/cats/istoriya.png)
History, 21.08.2019 04:00
![Konu](/tpl/images/cats/en.png)
English, 21.08.2019 04:00
![Konu](/tpl/images/cats/geografiya.png)
Geography, 21.08.2019 04:00
![Konu](/tpl/images/cats/istoriya.png)
History, 21.08.2019 04:00
![Konu](/tpl/images/cats/mat.png)
![Konu](/tpl/images/cats/ekonomika.png)
![Konu](/tpl/images/cats/obshestvoznanie.png)
Social Studies, 21.08.2019 04:00
![Konu](/tpl/images/cats/en.png)
![Konu](/tpl/images/cats/istoriya.png)
History, 21.08.2019 04:00