Engineering, 28.06.2020 02:01 djemdn
3. In Figure 3, the sleeve at A slides upward on the guide DE at a constant velocity of 5
m/s. The guide DE is inclined at 45° to the horizontal. Bar AC is pivoted to the sleeve
at A with a pin and slides through the sleeve at B. Sleeve B is pivoted to the ground.
Using the vector analytical method, determine
(a) the angular velocity and the sliding velocity of link AC, and
(b) the angular acceleration and the sliding acceleration of link AC.
I
44
10 m/s
A
1 m
450
30%
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 19:10, phantomlizz3233
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
Engineering, 04.07.2019 19:10, LadyHolmes67
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:10, netflixacc0107
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
Engineering, 04.07.2019 19:10, moneyyfletcher
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
You know the right answer?
3. In Figure 3, the sleeve at A slides upward on the guide DE at a constant velocity of 5
m/s. The...
Questions in other subjects:
Social Studies, 21.06.2019 15:30
History, 21.06.2019 15:30
