Engineering, 26.06.2020 16:01 Chavens520

Choose K, z and p so that the closed-loop system G(s) has a maximum of 10% overshoot to a step input and a 1% settling time of no more than 1.5sec. Do not attempt any pole/zero cancellation! Recall that when a pole is very close to a zero, the effects of the two are nearly cancelled in the output. Hint: Review lecture notes on System Zeros. Verify your design using Matlab by plotting a step response of your closed-loop system. Print the step response and attach it to your homework

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

You know the right answer?

Choose K, z and p so that the closed-loop system G(s) has a maximum of 10% overshoot to a step input...