g A rectangular bar of length L has a slot in the central half of its length. The bar has width b, thickness t, and elastic modulus E. The slot has width b/3. The overall length of the bar is L = 570 mm, and the elastic modulus of the material is 77 GPa. If the average normal stress in the central portion of the bar is 200 MPa, calculate the overall elongation δ of the bar.

the overall elongation δ of the bar is  1.2337 mm

Explanation:

From the information given :

According to the principle of superposition being applied to the axial load P of the system; we have:

where;

δ = overall elongation

= elongation of bar AB

= elongation of  bar BC

 elongation of bar CD]

If we replace; for  δ  and bt for area;

we have:

where ;

P = load

L = length of the bar

A = area of the cross-section

E = young modulus of elasticity

Let once again replace:

P for  (since load in all member of AB, BC and CD will remain the same )

for ,  

for and

for

for  

b for  

The stress in the central portion can be calculated as:

So; Now:

δ = 1.2337 mm

Therefore, the overall elongation δ of the bar is  1.2337 mm

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about

answer: report them

explanation: