subject
Engineering, 16.06.2020 22:57 tonio638

Tip: String. find(searchWord)In this challenge, you will be asked to find one string in the text of another string. Python provides a function to help with this called find() that can be called on any string. To find a string needle in another string haystack, use haystack. find(needle), which will return the position where needle was found, or -1 if it was not found at all. haystack= 'abc def ghi'needle= 'def'needleLocation= haystack. find(needle)print(needneedleLocatio n)print(haystack. find('chicken'))RUN FIND TESTWrite a function isRed() that accepts a string parameter and looks for the presence of the word ‘red’ in the string. If it is found, return boolean True otherwise False. Finally output the result of calling the function with the value in text. CHECK IT!# Get our input from the command lineimport systext= sys. argv[1]# Write your code here

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, BardiFan
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
image
Engineering, 04.07.2019 12:10, Ryantimes2
On a average work day more than work place firs are reorted
Answers: 1
image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
Tip: String. find(searchWord)In this challenge, you will be asked to find one string in the text of...

Questions in other subjects:

Konu
Mathematics, 08.04.2021 03:30
Konu
Mathematics, 08.04.2021 03:30