Engineering, 07.06.2020 03:58 Theyfall4raven

Switching function L controls the stairway electric lights in a 2-story building. Motion sensors S1 and S2 installed near the stairway ends at the 1 st and the 2 nd floors turn on electric light L when any of the motion sensor signals is 1. (L =1 when the light is on). The electric light is disabled by daylight sensor E (E=1 when the background light is sufficient). There is also manual switch M to override the automatic control (L=1 unconditionally when M = 1). Function L is described by the algebraic expression L (S1, S2, E, M) = (S1 + S2) E’ + M
Obtain the following: a. Schematics for implementation of function L with requested logic gates. The gates may have any number of inputs.
1. AND, OR gates and inverters (NOT)
2. Any number of AND gates and inverters (OR gates are not available)
3. Any number of OR gates and inverters (AND gates are not available),
Can someone explain with details numbe 2 and 3

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, 0436500

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

continue

Engineering, 04.07.2019 18:20, maustin5323

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

continue

You know the right answer?

Switching function L controls the stairway electric lights in a 2-story building. Motion sensors S1...