Engineering, 06.06.2020 02:00 cheychey1620

A spherical pressure vessel has an inside diameter of 6 m and a wall thickness of 15 mm. The vessel will be constructed from steel [E = 200 GPa; ν = 0.29] that has a yield strength of 340 MPa. If the internal pressure in the vessel is 1,750 kPa, determine (a) the normal stress in the vessel wall, (b) the factor of safety with respect to the yield strength, (c) the normal strain in the sphere, and (d) the increase in the outside diameter of the vessel.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, rbgrh9465

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

continue

Engineering, 04.07.2019 19:10, Calliedevore

The proportional limit is always greater than the yield strength for a material. a)-trune b)- false

Answers: 3

continue

Engineering, 04.07.2019 19:20, dndndndnxmnc

The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal

Answers: 3

continue

Engineering, 04.07.2019 19:20, zoebtharpe

Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection

Answers: 1

continue

You know the right answer?

A spherical pressure vessel has an inside diameter of 6 m and a wall thickness of 15 mm. The vessel...