Engineering, 28.05.2020 01:06 aliami0306oyaj0n

A 460-V 60-Hz four-pole Y-connected induction motoris rated at 25 hp(note: this is the nominal output power at the nominal speed (or nominal slip).The equivalent circuit parameters areR1= 0.15 R2= 0.154 XM= 20 X1= 0.852 X2= 1.066 PF&W= 400 WPmisc= 150 WPcore= 400 WFor a slip of 0.02, find(Importantnote: this 2% slip mayor may notbe the nominal slip of the motoras it is not explicitly stated. Hence, the output power associated with this slip maybe different than the given nominal output power (i. e. 25 hp)).(a)The line current IL(b)The stator power factor (c)The rotor power factor (d)The rotor frequency (e)The stator copper losses SCLP(f)The air-gap power PAG(g)The power converted from electrical to mechanical form Pconv(h)The induced torque ind(i)The load torque load(j)The overall machine efficiency (k)The motor speed in revolutions per minute and radians per second(l)What is the starting line current of this motor?(Hint: starting slip is one, now redraw your circuit and solve it for the starting current)(m) What is the slip at the pullout torque? What is the pullout torque of this motor?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, koolgurl2003

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:10, lillygrl100

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

continue

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

You know the right answer?

A 460-V 60-Hz four-pole Y-connected induction motoris rated at 25 hp(note: this is the nominal outpu...