Engineering, 27.05.2020 08:57 quarrella

A primary settling tank at a wastewater treatment plant has one influent flow (Qin) and two effluent flows (Qout and Qw) as indicated in the schematic below. The tank has an influent concentration (cin) of 220 mg/L of suspended solids, an effluent concentration (cout) of 45 mg/L of suspended solids, and a waste concentration (cw) of 10,000 mg/L of suspended solids. If the influent flow rate is 450 m3/hr, what is the waste flow rate

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

You know the right answer?

A primary settling tank at a wastewater treatment plant has one influent flow (Qin) and two effluent...