Engineering, 23.05.2020 01:58 Alayna1037

From the following numbered list of characteristics, decide which pertain to (a) precipitation hardening, and which are displayed by (b) dispersion strengthening.

(1) The strengthening mechanism involves the hindering of dislocation motion by precipitates/particles.
(2) The hardening/strengthening effect is not retained at elevated temperatures for this process
(3) The hardening/strengthening effect is retained at elevated temperatures for this process
(4) The strength is developed by a heat treatment
(5) The strength is developed without a heat treatment

(a) 1,3,5 (b) - 1,2,4
(a) 3,5 (b) 1,2,4
(a) 1,2,4 (b) 3,5
(a) 1,2,4 (b) - 1,3,5
(a)-1,3,4 (b) . 1,2,5

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Engineering, 04.07.2019 19:20, mads000

Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.

Answers: 1

continue

Engineering, 05.07.2019 04:30, kookycookiefanx

Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?

Answers: 2

continue

You know the right answer?

From the following numbered list of characteristics, decide which pertain to (a) precipitation harde...