Engineering, 23.05.2020 00:07 kieramacphee6216
A rectangular concrete beam of width b = 24 in. is limited by architectural considerations to a maximum total depth h = 16 in. It must carry a total fac- tored load moment Mu = 400 ft-kips.
Design the flexural reinforcement for this member, using compression steel if necessary. Allow 3 in. to the center of the bars from the compression or tension face of the beam. Material strengths are fy = 60,000 psi and fc′ = 4000 psi. Select reinforcement to provide the needed areas, and show a sketch of your final design, including provision for No. 4 (No. 13).
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:20, krojas015
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20, 21megoplin
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
A rectangular concrete beam of width b = 24 in. is limited by architectural considerations to a maxi...
Questions in other subjects:
Mathematics, 16.09.2021 19:40
