Engineering, 22.05.2020 18:04 shantejahtierr63961
Transient conductionA slab of pure aluminum is 2 cm thick, 1 m wide, and 1 m tall. It is initially at a temperature of 500oC. What is the temperature of the slab after 3 minutes for the following cases?
A) If the slab is exposed to air at 20oC flowing on both sides with h = 150 W/m2·K.
B) If the slab is exposed to air at 20oC flowing on both sides with h = 150 W/m2·K, but one side(1 m x 1 m) is covered by a sheet of plastic that is 1 cm thick with kplas = 0.5 W/m·K. I. e. air flows on one surface of the metal and one surface of the plastic.
C) If the slab (only metal) is in a vacuum chamber with walls that are held at a temperature of 100oC. Consider the slab to have a thin coating of oxidation that results in an emissivity of 0.8.
D) If the slab (only metal) is exposed to air at 20oC flowing on both sides with h = 150 W/m2·K but there is an electric current of 300 A flowing through the plate, with a voltage of 150 V across the plate. Also determine the Biot number for the slab in each case and explain any complexity in calculating it.
Answers: 3
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 18:20, cdyshaylia55
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
Engineering, 04.07.2019 19:20, amandaaarmentaa
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
Transient conductionA slab of pure aluminum is 2 cm thick, 1 m wide, and 1 m tall. It is initially a...
English, 20.12.2019 19:31
Mathematics, 20.12.2019 19:31
Biology, 20.12.2019 19:31