Engineering, 21.05.2020 04:03 mhurtado143
A) Consider an orthogonal cutting operation with a thickness of uncut layer of 1 mm and a took rake angle of 7o . You measure the chip thickness to be 1.5 mm. Assuming that Merchant’s equation holds, what is the friction coefficient between the tool and the chip? b) In the same set up, the rake angle is changed to 17o . Assuming that this did not affect the friction condition between the tool and the chip, what do you expect the chip thickness to be?
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, ashleybaber4966
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:20, annette211pdd8v9
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
You know the right answer?
A) Consider an orthogonal cutting operation with a thickness of uncut layer of 1 mm and a took rake...
Questions in other subjects:
