subject
Engineering, 21.05.2020 00:04 jngonzo1226

A barrel shifter is a digital subsystem that can shift multiple bits in a vectors
positions at once. In a single pass through the shifter, the input can rotate
from 0 to 7 positions. Barrel shifters are useful for implementing bit extraction
operations supported in many computer instruction sets. The subsystem has
eight data inputs, D7, D6, , D0, eight data outputs, O7, O6, …,O0, and three
control inputs, S2, S1, S0. The control inputs specify the number of positions to
shift the input to the left. Inputs that "fall off the end" are rotated around to the
low-order bits of the output. For example, when S2 = S1 = S0 = 0, the inputs
are simply gated straight through to the outputs: O7 = D7, O6 = D6, , O1 = D1,
O0 = D0. When S2 = S1 = 0, S0 = 1, the input bits are shifted one place toward
the left: O7 = D6, O6 = D5, …, O1 = D0, O0 = D7. Note that D7 is rotated around
to the 0th output position. When S2 = S1 = S0 = 1, the input is shifted seven
positions to the left, with the high-order bits wrapping around to the low-order
output positions: O7 = D0, O6 = D7, …, O1 = D2, O0 = D1. This is the same as
shifting one position to the right, with the inputs wrapping from the low-order to
the high-order positions. Write the truth table for the 8-bit barrel shifter with the
bit positions determined by the value of the three control signals.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 12:10, Ryantimes2
On a average work day more than work place firs are reorted
Answers: 1
image
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
image
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
image
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
A barrel shifter is a digital subsystem that can shift multiple bits in a vectors
positions a...

Questions in other subjects:

Konu
Mathematics, 15.04.2020 00:32