Q.7) The beam shown in figure is supported
by a hinge at point o (which is parallel to x-
axis) and a cable. Determine the support
reactions at O and the tension supported by
the cable. [6 marks]
0.8 m
F=(51-12) KN
(ATA = 75 kN, My = 5 kN. m. Mo, = -22 kN. m. O, = 50 kN, 0,= -15 kN,
0, = 54 kN
(B) TAD
= 32.1 kN. M. = 0 kv. m. Mor = 41.4 kN. m, 0, = 15 kN. o, = 23 kN.
0 = -50 kn
(C)TAD = 54 kN, My = -14.4 kN. m. Mo, = 0 kNm, 0, = 23.1 kN. O, = 19 kN.
0,= –22 km
(DTAD = 57 kN. M.y = 4.5 kN. m. Mo, = -44.1 kN. m. 0 = -9k. oy
= 90 KN 0,= 32.1 KN
(E)Other answer Tan = ? N. My =? kN. m.M=? KM,
0,=? kN
0,=? KNO, =? KN.

please help me with this question

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?