subject
Engineering, 09.05.2020 10:57 hdjehd

Problem 4 (15 points) An incident occurs on a freeway (two lanes in each direction) in a relatively rural area, which reduces the capacity of the freeway to 350 vehicles per hour (one direction). Before the incident, the capacity of the section of the freeway was 3,200 vehicles per hour (one direction). The traffic demand on this section of freeway from the time of the incident until after the traffic backup is cleared is a constant 2,150 vehicles per hour (one direction). It takes 60 minutes to remove the incident and restore the facility to full capacity. Answer the following questions regarding the incident.
(A) How long was traffic affected by the incident (a queue present)?
(B) What was the maximum queue length (in number of vehicles)?
(C) What was the total delay associated with the incident (in vehicle hours)?

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
image
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
image
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
image
Engineering, 04.07.2019 18:20, CelesteN64
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
You know the right answer?
Problem 4 (15 points) An incident occurs on a freeway (two lanes in each direction) in a relatively...

Questions in other subjects:

Konu
Mathematics, 19.04.2020 17:57