subject
Engineering, 07.05.2020 12:01 nicolew647

On a piece of paper, sketch the x-y stress state and the properly oriented principal stress state. Use the resulting sketch to answer the questions in the subsequent parts of this GO exercise.(a) The angle -4.45° locates a principal stress plane. Give the stress value including sign if any.(b) The angle 85.6° locates the other in-plane principal stress plane. Give the stress value including sign if any.(c) What stress or stresses occur on a plane at 40.6°? Give the stress value or values including sign if any.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
image
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
image
Engineering, 04.07.2019 18:10, heidiburgos1own6c0
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
You know the right answer?
On a piece of paper, sketch the x-y stress state and the properly oriented principal stress state. U...

Questions in other subjects:

Konu
English, 21.01.2021 01:10
Konu
World Languages, 21.01.2021 01:10