Engineering, 07.05.2020 04:05 amanda2517

1. A is applied to a wall or roof rafters to add strength and keep the building straight and plumb.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:10, nandalabella06

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

continue

Engineering, 06.07.2019 03:20, demotte79991

What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.

Answers: 3

continue

Engineering, 06.07.2019 04:10, kulvindar1984

Ahousehold refrigerator operating steadily and with a coefficient of performance of 2.5 removes energy from a refrigerated space at a rate of 650 kj/h. evaluating electricity at $0.06 per kw. h, determine the cost of electricity in a month when the refrigerator operates for 360 hours.

Answers: 3

continue

You know the right answer?

1. A is applied to a wall or roof rafters to add strength and keep the building straight and plumb....