Engineering, 07.05.2020 00:09 NemoMay7990

Consider the system whose transfer function is given by: 1()(21)(3)Gsss=++. (a)Use the root-locus design methodology to design a lead compensator that will provide a closed-loop damping ζ =0.4and a natural frequency ωn=9 rad/sec. The general transfer function for lead compensation is given by(b)Use MATLAB to plot the root locus of the feed-forward transfer function, D(s)*G(s), and verify if the closed loop system pole is located on a root locus for the calculated value of K

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, jadeochoa4466

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:20, luisgonz5050

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

You know the right answer?

Consider the system whose transfer function is given by: 1()(21)(3)Gsss=++. (a)Use the root-locus de...