A specific internal combustion engine has a displacement volume VD of 5.6 liters. The processes within each cylinder of the engine are modeled as a cold air-standard Diesel cycle with a cutoff ratio rc = 2.5. The pressure, temperature, and volume of the air at the beginning of compression are p1 = 95 kPa, T1 = 26◦C, and V1 = 6.0 liters. Use values of cv = 0.72 kJ/kg·K and γ = 1.38 for air. Determine: (a) the net work per cycle, in kJ. (b) the thermal efficiency η

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.