subject
Engineering, 06.05.2020 03:38 shayshayyy41

The pulse train and the Fourier series The pulse train is a periodic signal that has a Fourier series which coefficients Cn can be found using a generic equation. If the pulse train as magnate A= 12, with T= 1 milisecond and tao = to 0.25 milliseconds Determine the following: 1_ Using the generic equation for Cn, determine the Cn coefficients from n= -8 to n=8 (remember that negative Cn’s from -1 to -8, will have the same amplitude as the positive Cn’s coefficients from 1 to 8). 2_ Determine the fundamental frequency fo 3_ what are the values of the harmonic frequencies, f2=2xfo, f3=3xfo … f8? 4_ For what values of the harmonic frequencies the Cn coefficients will be equal to zero? 5_ Find the magnitude and phase of Cn from n=-8 to n=8. Note: The coefficients Cn are complex numbers, Complex Cn= real{Cn} +j Im{Cn}, for the pulse train all the Im{Cn} terms are equal to zero. Them Mag = SQR[Real^2 + Imaginary^2)] and

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
image
Engineering, 04.07.2019 18:10, nandalabella06
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
image
Engineering, 04.07.2019 18:20, dlr1628
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
The pulse train and the Fourier series The pulse train is a periodic signal that has a Fourier serie...

Questions in other subjects:

Konu
Biology, 07.12.2020 20:10
Konu
Mathematics, 07.12.2020 20:10
Konu
Mathematics, 07.12.2020 20:10