Engineering, 05.05.2020 19:43 SKYBLUE1015

Cartridge electrical heater is shaped as a cylinder of length L 200 mm and outer diameter D 20 mm. Under normal operating conditions, the heater dissipates 2 kW while submerged in a water flow that is at 20 C and provides a convection heat transfer coefficient of h 5000 W/m2 K. Neglecting heat transfer from the ends of the heater, determine its surface temperature Ts. If the water flow is inadvertently terminated while the heater continues to operate, the heater surface is exposed to air that is also at 20 C but for which h 50 W/m2 K. What is the corresponding surface temperature

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:20, dlr1628

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

continue

Engineering, 04.07.2019 19:10, LadyHolmes67

Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false

Answers: 3

continue

You know the right answer?

Cartridge electrical heater is shaped as a cylinder of length L 200 mm and outer diameter D 20 mm. U...